In progress
System Mode
Our system operates in Standalone/AES67 mode. This uses a PoE+ network switch to connect and power the antennas with a single CAT5 or CAT6 cable to the AES67/Config port on the bottom of the antenna.
Web Interface
Log In
Antennas
IO Devices
Beltpacks
General
| General | |
|---|---|
| Headset Type | Auto |
| Display Mode | Standard |
| Language | English |
| Silent Mode | On |
| Show on Reply | On |
| Partyline Reply | Reply to Caller |
Notification
| Notification | Light | Vibrate | Beep | Voice |
|---|---|---|---|---|
| Call | Off | Off | Off | N/A |
| Notification/Beep | Off | Off | Off | N/A |
| Info/Low Battery | Off | On | Off | On |
| Out of Range | N/A | On | Off | On |
| Volume Keys | N/A | Off | On | Off |
Registration
Allow Multi-Registration: On
Audio
Use default settings, adjust as needed per crew member.
Keys
Rotaries
Quick Menu
Always-On
Sets up to five functions that are active without pressing any key. Not used.
Trigger
Not used.
On-Talk
Not used.
On-Notification/Beep
Not used.
On-Vox
Not used.
Audio Usage
Sets volume for individual party lines. See 001 User - Start-Up Guide/ > 03 Volume Adjustment and Quick Mute.
Profiles
I have created profiles for each beltpack configuration. Please leave these the way they are. Feel free to edit the individual beltpack configuration, but leave the profiles as they are so that the system can easily be restored to its default state.